Client area

Cart

NAMING CODES

PROFESSIONAL FOOTWEAR ACCORDING TO ISO STANDARD 20347:2007

FOOTWEAR WITH NO TOE PROTECTION

O1 = OB + A + E

Closed heel area.

OB = Basic requirements.

A = Antistatic footwear. Dissipates electrostatic charge generated by movement and activity to the ground.

E = Energy absorption in the heel area. Soft support surface at the heel. PREVENTS FATIGUE and joint injuries.

FO = Resistance to fuel oil of outsole. OPTIONAL REQUIREMENT fulfilled by all of our models.

02 = O1 + WRU

WRU = Water resistant upper material (penetration and absorption).

O3 = O2+P = O1+WRU+P+OUTSOLE WITH RELIEF/PADS

P = Penetration resistance of the midsole.

SRC = Slip resistance on both surfaces.

SRA = Slip resistance on ceramic tile floor with diluted soap solution of sodium lauryl sulphate (flat and heel).

SRB = Slip resistance on steel with glycerol (flat and heel).

PROFESSIONAL SAFETY FOOTWEAR

Toe cap with impact resistance of 200 Joules as per ISO standard EN 20345:2007

S1 = SB + A + E

Closed heel area.

SB = Basic requirements.

A = Antistatic footwear. Dissipates electrostatic charge generated by movement and activity to the ground.

E = Energy absorption in the heel area. Soft support surface at the heel. PREVENTS FATIGUE and joint injuries.

FO = Resistance to fuel oil of outsole. OPTIONAL REQUIREMENT fulfilled by all of our models.

S2 = S1 + WRU

WRU = Water resistant upper material (penetration and absorption). Liquid repellent. All of our models.

S3 = S2+P = S1+WRU+P+OUTSOLE WITH RELIEF/PADS

P = Penetration resistance of the midsole.

SRC = Slip resistance on both surfaces.

SRA = Slip resistance on ceramic tile floor with diluted soap solution of sodium lauryl sulphate (flat and heel).

SRB = Slip resistance on steel with glycerol (flat and heel).

SAFETY FOOTWEAR FOR WILDFIRE PREVENTION AND EXTINCTION

FEATURES

Pursuant to EN 15090:2006 standard on risk-resistant safety footwear for firefighters in TYPE1 (general rescue and wildland firefighting, fires with vegetation as fuel such as forests, crops, planted plots, pastureland or cropland).

HI = Heat insulation.

CI = Cold insulation.

HRO = Resistance to hot contact of outsole.

FO = Resistance to fuel oil of outsole.

M = Metatarsal protection (safety footwear with metatarsal protection).

WRU = Water resistant (penetration and absorption).

WR = Water resistant safety footwear.

SAFETY FOOTWEAR FOR CHAIN SAW USE

FEATURES

In accordance with standards UNE EN ISO 20345:2008 and UNE EN ISO 17249:2004

  • Safety footwear for chain saw use can only be in designs C, D or E.
  • Minimum height in the protection area for C designs (calf boots) is 188 mm.
  • Protection must encompass the vamp, tongue and toe cap.
  • There must be no gap between the top and the protection material.
  • The protection material must be attached to the footwear.

There are four protection levels, which represent the chain saw's speed:

  • CLASS I: 20 m/s
  • CLASS II: 24 m/s
  • CLASS III: 28 ms/s
  • CLASS IV: 32 m/s

Uso de cookies

Tenga en cuenta que este sitio web depende del uso de cookies para funcionar de forma correcta y requiere la instalación de varias cookies en su dispositivo. Esto nos ayuda a mejorar el contenido del sitio web para que sea más útil y relevante para Usted. Si continúa navegando, consideramos que acepta su uso. Para más información y detalles sobre cómo eliminar las cookies, por favor consulte nuestra Política de Cookies. CERRAR